HANGZHOU LECCO ELECTRIC APPLIANCE CO.,LTD
TURN THE LIFE ON
Add to Cart
LED Bulb Lights 12W A60 E27 Plastic Plus Aluminum SDCM < 3 Saving 90% Energy
Description
1 . The average lifetime of our LED bulb is at least 30 000h .
2 . Saving 90% electricity compared to traditional incandescent bulbs .
3 . No flicker , No noise , No electromagnetic interference ( EMI ) .
4 . SMD 2835 Chip 0.2W .
5 . Using nickleplated aluminum base , very good to avoid getting rusted .
6 . We choose very good driver supplier like Meanwell,mosopower to have constact current output to the LED chip , which is also safe .
7 . All products are output strictly under ISO 9001 Quality Management System and CE satisfied .
8 . Voltage : all of our LED products supply wide range voltage input.
Lamp parameters
| Type | LED Bulb 12W | |
| Optical Parameter | Color Rendering Index | > 80 Ra |
| SDCM | < 3 | |
| Color Temparature | 6400K | |
| Luminous Efficency | > 100 lm / w | |
| Light Transmittance: | > 90% | |
| Luminous Decay | < 5% at 3000hrs , < 9% at 6000hrs | |
| LED Chip Brand | Epistar | |
| Junction Temperature | 65 ℃ | |
| Chip Quantity | 60 pcs SMD 2835 , 0.2W | |
| Electronic Parameter | Power | 12W |
| Power Factor | > 0.5 | |
| Isolated Power Supply | No | |
| Input Voltage | 85V - 265V | |
| Current | Constact Current with IC | |
| Dirver Brand | Mosopower , Wellpower , Meanwell , Lifud | |
| Base | Size | E27 |
| Materials | Nickelplated Aluminum | |
| type | Soldering | |
| Plastic cover | Wideth | 60mm |
| Materials | PBT + AL | |
| The Value of Permissible Voltage | < 5000V | |
| Thermal Transmissivity | 5 - 7 W / ( m.K ) | |
| Beam Angle | 200 ° | |
| Operating Temp. | -20℃ to +40℃ | |
| Life Time | > 30 000H | |
| Energy Efficiency Grade | A | |
| Certification | CE / RoHS / FCC | |
| Lumen | > 1200 LM | |
Quality Control ( QC )
1 . Strict raw materials inspection .
2 . Technical parameter adjustment :
1 ) Technicians will tune the technical parameters of each items to make sure the Wattage , P.F.living up to the requirement of customer
2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage
3 ) Turn on off test , to make sure the life time of the lamp
4 ) Start test in low temperature and low voltage ( light in the fridge )
3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .
4 . we are testing every lamp before packed in the cartons .
5 . In the warehouse , our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .
6 . After laoding the container , we will trace the life time of ech order , we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .
Application
Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .
